Trades Specialist Mason & Plasterer

Job Description

Trades Specialists (Mason & Plasterer) perform journey-level masonry and plastering work and may supervise others in the construction and repair of buildings and structures involving the use of a variety of masonry materials including brick, stone, plaster, and concrete.
• Lays building materials such as stone, brick, and concrete cinder block to construct or repair walls, partitions, utility manholes, firebrick linings in furnaces, and chimneys.
• Lays out work following blueprints and specifications by measuring distance from reference points and marking guidelines on working surface.
• Mixes or directs the mixing of mortar.
• Spreads mortar on working surface and to block or stone and positions and aligns the block using a plumb bob, gauge line, and level.
• Removes excess mortar from face of block and finishes mortar between brick with pointing tool or trowel.
• Smooths and finishes surfaces of poured concrete floors, walls, and sidewalks to specified texture.
• May mix or direct the mixing of concrete.
• Spreads concrete to specified depth and workable consistency.
• Levels and smooths surface of freshly poured concrete using straightedge and float.
• Removes rough or defective spots and patches holes with fresh concrete.
• Applies ceramic tiles to walls, floors, and ceilings.
• Prepares surface by removing damaged tiles or applies plaster or concrete base.
• Spreads adhesive base on surface.
• Cuts, shapes, and applies tiles to surface according to specifications.
• Applies coats of plaster to walls and ceilings.
• Mixes or directs the mixing of plaster and the erection of scaffolds if needed.
• Removes broken or loose plaster and otherwise prepares surface.
• Applies scratch coat of plaster.
• Applies finish coats of plaster to desired thickness and texture.
• May draw rough sketches or prepare plans to scale from oral or written instructions to accomplish the project.
• From blueprints, specifications, or oral or written instructions, may estimate labor, materials, tools and equipment necessary for the project.
• Assembles materials, tools, and equipment required to complete the project according to plans.
• May supervise and instruct others in performing masonry and plastering work.
• Assigns work to masonry crew.
• Gives verbal instructions, and/or demonstrates proper masonry or plaster techniques and the use of masonry and plastering tools and equipment.
• Observes and inspects the work while in progress and when completed to ensure that the job is done properly.
• Requires daily travel within the 10 county district.
LinkedIn: https://www.linkedin.com/company/nys-office-for-people-with-developmental-disabilities/posts/?feedView=all
#LI-PS1

Minimum Qualifications:
Non-competitive:
Four years of full-time experience in masonry under a skilled tradesperson which would provide training equivalent to that given in a training, apprenticeship, or equivalent program; OR an equivalent combination of experience and training gained by completion of technical courses in masonry at a school, institute, or branch of the Armed Services; OR successful completion of the two-year Trades Specialist Mason & Plasterer traineeship or a two-year masonry training, apprenticeship, or equivalent program* such as the New York State Civil Service Employees Association-Partnership Applied Skilled Trades Traineeship and Certificate Program.
* Successful completion of the traineeship and the training program includes a total of 288 hours of trade-specific class room instruction, 45 hours of technical math course work, 45 hours of technical communications course work, and 15 hours of blueprint/schematic reading course work. Course work must be completed with an average of "C" or better. Additionally, successful completion of the traineeship also includes 4,000 hours of on-the-job training.
When required to operate motor vehicles, candidates must possess a valid New York State driver's license appropriate for the type of vehicle to be operated.
Trades Specialist Mason & Plasterer Trainee 1, NS (equivalent to SG-9):
Full-time permanent service in a position allocated at Grade 12 or below which is primarily engaged in the performance of unskilled and/or semiskilled labor and trades tasks; must be 18 years of age or older; possess a High School diploma or general equivalency diploma recognized by the New York State Education Department; and be proficient in English and math.
Trades Specialist Mason & Plasterer Trainee 2, NS (equivalent to SG-11):
Successful completion of a 52-week probationary period as a Trades Specialist Mason and Plasterer Trainee 1; OR completion of 45 hours of technical math coursework and 15 hours of blueprint reading/schematics coursework or passage of an equivalency exam or proof of successful completion of equivalent training, 144 hours of mason and plaster trade-specific instruction, and 2,000 hours of on-the-job training. Trainees must maintain a "C" or better average in their coursework. When required to operate motor vehicles, candidates must possess a valid New York State driver's license appropriate for the type of vehicle to be operated.

Minimum Qualifications

Four years of full-time experience in masonry under a skilled tradesperson which would provide training equivalent to that given in a training, apprenticeship, or equivalent program; OR an equivalent combination of experience and training gained by completion of technical courses in masonry at a school, institute, or branch of the Armed Services; OR successful completion of the two-year Trades Specialist Mason & Plasterer traineeship or a two-year masonry training, apprenticeship, or equivalent program* such as the New York State Civil Service Employees Association-Partnership Applied Skilled Trades Traineeship and Certificate Program. * Successful completion of the traineeship and the training program includes a total of 288 hours of trade-specific class room instruction, 45 hours of technical math course work, 45 hours of technical communications course work, and 15 hours of blueprint/schematic reading course work. Course work must be completed with an average of "C" or better. Additionally, successful completion of the traineeship also includes 4,000 hours of on-the-job training. When required to operate motor vehicles, candidates must possess a valid New York State driver's license appropriate for the type of vehicle to be operated. Trades Specialist Mason & Plasterer Trainee 1, NS (equivalent to SG-9): Full-time permanent service in a position allocated at Grade 12 or below which is primarily engaged in the performance of unskilled and/or semiskilled labor and trades tasks; must be 18 years of age or older; possess a High School diploma or general equivalency diploma recognized by the New York State Education Department; and be proficient in English and math. Trades Specialist Mason & Plasterer Trainee 2, NS (equivalent to SG-11): Successful completion of a 52-week probationary period as a Trades Specialist Mason and Plasterer Trainee 1; OR completion of 45 hours of technical math coursework and 15 hours of blueprint reading/schematics coursework or passage of an equivalency exam or proof of successful completion of equivalent training, 144 hours of mason and plaster trade-specific instruction, and 2,000 hours of on-the-job training. Trainees must maintain a "C" or better average in their coursework. When required to operate motor vehicles, candidates must possess a valid New York State driver's license appropriate for the type of vehicle to be operated.

Requirements

Non-competitive:
Four years of full-time experience in masonry under a skilled tradesperson which would provide training equivalent to that given in a training, apprenticeship, or equivalent program; OR an equivalent combination of experience and training gained by completion of technical courses in masonry at a school, institute, or branch of the Armed Services; OR successful completion of the two-year Trades Specialist Mason & Plasterer traineeship or a two-year masonry training, apprenticeship, or equivalent program* such as the New York State Civil Service Employees Association-Partnership Applied Skilled Trades Traineeship and Certificate Program.
* Successful completion of the traineeship and the training program includes a total of 288 hours of trade-specific class room instruction, 45 hours of technical math course work, 45 hours of technical communications course work, and 15 hours of blueprint/schematic reading course work. Course work must be completed with an average of "C" or better. Additionally, successful completion of the traineeship also includes 4,000 hours of on-the-job training.
When required to operate motor vehicles, candidates must possess a valid New York State driver's license appropriate for the type of vehicle to be operated.
Trades Specialist Mason & Plasterer Trainee 1, NS (equivalent to SG-9):
Full-time permanent service in a position allocated at Grade 12 or below which is primarily engaged in the performance of unskilled and/or semiskilled labor and trades tasks; must be 18 years of age or older; possess a High School diploma or general equivalency diploma recognized by the New York State Education Department; and be proficient in English and math.
Trades Specialist Mason & Plasterer Trainee 2, NS (equivalent to SG-11):
Successful completion of a 52-week probationary period as a Trades Specialist Mason and Plasterer Trainee 1; OR completion of 45 hours of technical math coursework and 15 hours of blueprint reading/schematics coursework or passage of an equivalency exam or proof of successful completion of equivalent training, 144 hours of mason and plaster trade-specific instruction, and 2,000 hours of on-the-job training. Trainees must maintain a "C" or better average in their coursework. When required to operate motor vehicles, candidates must possess a valid New York State driver's license appropriate for the type of vehicle to be operated.